1.DRAIN ENGINE COOLANT
11209
2.REMOVE V-BANK COVER SUB-ASSEMBLY
17880
3.REMOVE AIR CLEANER HOSE ASSEMBLY
22030
4.REMOVE THROTTLE WITH MOTOR BODY ASSEMBLY
Slide the clamp and disconnect the No. 4 water by-pass hose from the No. 3 water by-pass pipe.
Slide the clamp and disconnect the No. 5 water by-pass hose from the water inlet housing.
Disconnect the throttle with motor body connector.
Remove the 4 bolts, throttle with motor body assembly and gasket.
Slide the clamp and remove the No. 4 water by-pass hose from the throttle with motor body assembly.
Slide the clamp and remove the No. 5 water by-pass hose from the throttle with motor body assembly.