Home › Engine / Hybrid System › 3UR-FE ENGINE CONTROL › CAMSHAFT POSITION SENSOR
RM27L0U _51 Engine / Hybrid System _049294 3UR-FE ENGINE CONTROL _0235537 CAMSHAFT POSITION SENSOR A

3UR-FE ENGINE CONTROL  CAMSHAFT POSITION SENSOR  REMOVAL  


PROCEDURE

Hide 11102A 3.REMOVE CAMSHAFT POSITION SENSOR

A158617

a.

Disconnect the sensor connector.


b.

Remove the bolt and sensor.


Hide 11401G 4.REMOVE VVT SENSOR

A158607E04
1.86,0.139 2.758,0.338 0.899,0.199 12 for Bank 1: 0.054,0.139 0.938,0.338 0.884,0.199 12 for Bank 2:

a.

Disconnect the 4 sensor connectors.


b.

Remove the 4 bolts and 4 sensors.