Home › Engine / Hybrid System › 3UR-FBE ENGINE MECHANICAL › CYLINDER HEAD GASKET
RM27L0U _51 Engine / Hybrid System _049295 3UR-FBE ENGINE MECHANICAL _0235551 CYLINDER HEAD GASKET A

3UR-FBE ENGINE MECHANICAL  CYLINDER HEAD GASKET  REMOVAL  


PROCEDURE

Hide 1.REMOVE EXHAUST MANIFOLD

Hide 2.REMOVE CAMSHAFT

Hide 13801 3.REMOVE NO. 1 VALVE ROCKER ARM SUB-ASSEMBLY

a.

Remove the 32 valve rocker arms from the cylinder head.

HINT:

Arrange the removed parts in the correct order.



Hide 13750 4.REMOVE VALVE LASH ADJUSTER ASSEMBLY

a.

Remove the 32 valve lash adjusters from the cylinder head.

HINT:

Arrange the removed parts in the correct order.



Hide 13716 5.REMOVE VALVE STEM CAP

a.

Remove the 32 valve stem caps from the cylinder head.

HINT:

Arrange the removed parts in the correct order.



Hide 11102 6.REMOVE CYLINDER HEAD LH

a.
A160736E10
3.219,0.615 3.313,0.813 0.094,0.198 10 true 1 2.948,0 3.042,0.198 0.094,0.198 10 true 2

Uniformly loosen and remove the 2 bolts in the sequence shown in the illustration.


b.
A160737E19
2.74,0.271 2.844,0.448 0.104,0.177 10 false 1 0.521,1.813 0.625,1.99 0.104,0.177 10 false 2 2.771,1.813 2.875,1.99 0.104,0.177 10 true 3 0.531,0.271 0.635,0.448 0.104,0.177 10 true 4 2.198,1.813 2.302,1.99 0.104,0.177 10 true 5 1.083,0.271 1.188,0.448 0.104,0.177 10 true 6 2.177,0.271 2.281,0.448 0.104,0.177 10 true 7 1.073,1.813 1.177,1.99 0.104,0.177 10 true 8 1.646,0.271 1.75,0.448 0.104,0.177 10 true 9 1.573,1.802 1.76,1.979 0.188,0.177 10 true 10

Using a 10 mm bi-hexagon wrench, uniformly loosen the 10 cylinder head bolts in the sequence shown in the illustration. Remove the 10 cylinder head bolts and plate washers.

NOTICE:
·

Be careful not to drop washers into the cylinder head.

·

Head warpage or cracking could result from removing bolts in an incorrect order.



HINT:

Be sure to arrange the removed parts for each installation position separately.



Hide 11116 7.REMOVE NO. 2 CYLINDER HEAD GASKET

Hide 11101 8.REMOVE CYLINDER HEAD SUB-ASSEMBLY

a.
A160738E09
0.104,0.958 0.208,1.125 0.104,0.167 10 true 1 0.146,0.25 0.25,0.417 0.104,0.167 10 true 2

Uniformly loosen and remove the 2 bolts in the sequence shown in the illustration.


b.
A160739E15
0.594,0.25 0.708,0.406 0.115,0.156 10 false 1 2.719,1.76 2.833,1.917 0.115,0.156 10 true 2 0.563,1.76 0.677,1.917 0.115,0.156 10 true 3 2.698,0.25 2.813,0.406 0.115,0.156 10 true 4 1.104,1.75 1.219,1.906 0.115,0.156 10 true 5 2.156,0.25 2.271,0.406 0.115,0.156 10 true 6 1.125,0.25 1.24,0.406 0.115,0.156 10 true 7 2.188,1.76 2.302,1.917 0.115,0.156 10 true 8 1.635,0.25 1.75,0.406 0.115,0.156 10 true 9 1.594,1.76 1.781,1.917 0.188,0.156 10 true 10

Using a 10 mm bi-hexagon wrench, uniformly loosen the 10 cylinder head bolts in the sequence shown in the illustration. Remove the 10 cylinder head bolts and plate washers.

NOTICE:
·

Be careful not to drop washers into the cylinder head.

·

Head warpage or cracking could result from removing bolts in an incorrect order.



HINT:

Be sure to arrange the removed parts for each installation position separately.



Hide 11115 9.REMOVE CYLINDER HEAD GASKET