Home › Engine / Hybrid System › 3UR-FBE ENGINE MECHANICAL › REAR CRANKSHAFT OIL SEAL
RM27L0U _51 Engine / Hybrid System _049295 3UR-FBE ENGINE MECHANICAL _0235553 REAR CRANKSHAFT OIL SEAL A

3UR-FBE ENGINE MECHANICAL  REAR CRANKSHAFT OIL SEAL  INSTALLATION  


PROCEDURE

Hide 11381A 1.INSTALL ENGINE REAR OIL SEAL

a.

Apply MP grease to the lip of a new oil seal.


b.
A163777E02
0.524,0.777 0.842,1.060 0.318,0.283 10 SST 0.906,0.857 1.081,0.857 1.081,0.857 1.606,1.053 false

Using SST and a hammer, tap in the oil seal until its surface is flush with the rear oil seal retainer edge.

SST
09223-56010  

NOTICE:
·

Keep the lip free from foreign matter.

·

Do not tap on the oil seal at an angle.




Hide 32101 2.INSTALL DRIVE PLATE AND RING GEAR SUB-ASSEMBLY

Hide 35000 3.INSTALL AUTOMATIC TRANSMISSION ASSEMBLY