Home › Engine / Hybrid System › 3UR-FBE FUEL › FUEL PRESSURE PULSATION DAMPER
RM27L0U _51 Engine / Hybrid System _049297 3UR-FBE FUEL _0235575 FUEL PRESSURE PULSATION DAMPER A

3UR-FBE FUEL  FUEL PRESSURE PULSATION DAMPER  INSTALLATION  


PROCEDURE

Hide 23270 1.INSTALL FUEL PRESSURE PULSATION DAMPER ASSEMBLY

a.
A196290E01
0.37,1.279 0.877,1.481 0.508,0.202 10 O-Ring 1.301,1.651 1.809,1.853 0.508,0.202 10 O-Ring 0.957,1.382 1.084,1.382 1.084,1.382 1.22,0.898 false 1.887,1.756 2.014,1.756 2.014,1.756 2.234,1.182 false

Apply a light coat of spindle oil or gasoline to the 2 O-rings.

NOTICE:
·

Make sure that there are no scratches or foreign matter in or around the hole of the delivery pipe.

·

When installing the fuel pressure pulsation damper, be careful not to damage the O-ring.




b.
A194640

Install the 2 fuel pressure pulsation dampers to the fuel delivery pipes.


Hide 23275B 2.INSTALL FUEL PRESSURE PULSATION DAMPER COVER

a.
A194639

Install the 2 fuel pressure pulsation damper covers with the 4 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


Hide 23276A 3.INSTALL FUEL PRESSURE PULSATION DAMPER CAP

a.
A194638

Install the 2 fuel pressure pulsation damper caps.


Hide 12601B 5.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY