Home › Engine / Hybrid System › 3UR-FE FUEL › FUEL INJECTOR
RM27L0U _51 Engine / Hybrid System _049298 3UR-FE FUEL _0235578 FUEL INJECTOR A

3UR-FE FUEL  FUEL INJECTOR  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:

Perform "Inspection After Repairs" after replacing the fuel injector (See page Engine / Hybrid System>3UR-FE ENGINE CONTROL>SFI SYSTEM>INITIALIZATION).


PROCEDURE

Hide 23250 1.INSTALL FUEL INJECTOR ASSEMBLY

HINT:

Perform "Inspection After Repairs" after replacing the fuel injector (See page Engine / Hybrid System>3UR-FE ENGINE CONTROL>SFI SYSTEM>INITIALIZATION).


a.

Apply gasoline or spindle oil to a new O-ring and install it to the injector.

NOTICE:

Make sure that there is no damage or foreign material in the groove of the injector when installing the O-ring.



b.
U151477

Connect the injector connector.


c.
A161479E07
0.26,0.76 0.344,0.76 0.344,0.76 0.479,0.656 false 0.323,0.302 0.438,0.302 0.438,0.302 0.531,0.552 false 1.729,2.156 2.208,2.021 false 2.323,1.823 1.729,1.781 1.729,1.781 2.385,1.688 false 1.5,1.302 1.719,1.5 0.219,0.198 10 false *b 0.385,1.281 0.583,1.49 0.198,0.208 10 false *a 0.146,0.688 0.333,0.917 0.188,0.229 10 false B 0.188,0.229 0.396,0.458 0.208,0.229 10 false A 1.604,2.073 1.792,2.302 0.188,0.229 10 false B 1.604,1.708 1.813,1.938 0.208,0.229 10 false A

Install the injector to the fuel delivery pipe as shown in the illustration.

Text in Illustration
*a CORRECT
*b INCORRECT

NOTICE:
·

Make sure that there are no scratches or foreign matter in or around the insertion hole of the fuel delivery pipe.

·

When inserting the injector, be careful not to damage the O-ring.

·

Attach the part of the injector labeled B between the parts of the fuel delivery pipe labeled A.




d.
A214319E04
1.091,0.309 1.268,0.489 0.177,0.180 10 *1 1.6,2.615 1.784,2.806 0.184,0.191 10 *2 2.141,0.395 1.29,0.395 false 2.663,2.7 1.812,2.7 false

Check that each injector is installed to the fuel delivery pipe facing the direction shown in the illustration.

Text in Illustration
*1 Fuel Delivery Pipe
*2 No. 2 Fuel Delivery Pipe


Hide 23808 2.INSTALL NO. 2 FUEL DELIVERY PIPE SUB-ASSEMBLY

a.

Install the 2 spacers and 4 insulators to the cylinder head LH.


b.

Install the fuel delivery pipe (with injectors) to the cylinder head LH.


c.
A163659E09
0.448,1.042 0.875,1.042 false 0.667,1.385 0.979,1.385 false 0.958,0.344 1.292,0.813 false 0.417,0.646 0.969,0.865 false 0.833,1.583 1.01,1.729 0.177,0.146 10 false *a 1.969,1.625 2.135,1.781 0.167,0.156 10 false *b 0.458,1.292 0.625,1.469 0.167,0.177 10 false *2 0.781,0.26 0.938,0.448 0.156,0.188 10 false *1 0.26,0.552 0.385,0.698 0.125,0.146 10 false A 0.281,0.958 0.406,1.104 0.125,0.146 10 false B

Install the 2 bolts.

Torque:
21 N*m (214 kgf*cm, 15 ft.*lbf)

NOTICE:

Make sure that the part of the injector labeled B is between the parts of the fuel delivery pipe labeled A.


Text in Illustration
*1 Delivery Pipe
*2 Injector
*a CORRECT
*b INCORRECT


d.

Connect the No. 7 wire harness connector.


Hide 12601B 3.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

a.

Install the No. 1 engine cover.


Hide 23807 4.INSTALL FUEL DELIVERY PIPE SUB-ASSEMBLY

a.

Install the 2 spacers and 4 insulators to the cylinder head RH.


b.

Install the fuel delivery pipe (with injectors) to the cylinder head RH.


c.
A163659E09
0.448,1.042 0.875,1.042 false 0.667,1.385 0.979,1.385 false 0.958,0.344 1.292,0.813 false 0.417,0.646 0.969,0.865 false 0.833,1.583 1.01,1.729 0.177,0.146 10 false *a 1.969,1.625 2.135,1.781 0.167,0.156 10 false *b 0.458,1.292 0.625,1.469 0.167,0.177 10 false *2 0.781,0.26 0.938,0.448 0.156,0.188 10 false *1 0.26,0.552 0.385,0.698 0.125,0.146 10 false A 0.281,0.958 0.406,1.104 0.125,0.146 10 false B

Install the 2 bolts.

Torque:
21 N*m (214 kgf*cm, 15 ft.*lbf)

NOTICE:

Make sure that the part of the injector labeled B is between the parts of the fuel delivery pipe labeled A.


Text in Illustration
*1 Delivery Pipe
*2 Injector
*a CORRECT
*b INCORRECT


Hide 12613 5.INSTALL NO. 3 ENGINE COVER

a.

Install the No. 3 engine cover.


Hide 12263 6.CONNECT NO. 3 VENTILATION HOSE

a.

Connect the No. 6 wire harness connector.


b.

Connect the No. 3 ventilation hose.


Hide 23801P 7.CONNECT NO. 1 FUEL PIPE SUB-ASSEMBLY

a.

Connect the No. 1 fuel pipe to the No. 2 fuel delivery pipe (for quick type B) (See page Engine / Hybrid System>3UR-FE FUEL>FUEL SYSTEM>PRECAUTION).


b.

Attach the clamp.


Hide 23901 8.CONNECT FUEL TUBE SUB-ASSEMBLY

a.

Connect the fuel tube to the No. 2 fuel delivery pipe (for quick type A) (See page Engine / Hybrid System>3UR-FE FUEL>FUEL SYSTEM>PRECAUTION).


b.

Connect the fuel tube to the fuel delivery pipe (for metallic type) (See page Engine / Hybrid System>3UR-FE FUEL>FUEL SYSTEM>PRECAUTION).


Hide 23902 9.CONNECT NO. 2 FUEL TUBE SUB-ASSEMBLY

a.

Connect the No. 2 fuel tube to the fuel pressure regulator (for quick type A) (See page Engine / Hybrid System>3UR-FE FUEL>FUEL SYSTEM>PRECAUTION).


Hide 11.INSPECT FOR FUEL LEAK

a.

Connect the Techstream to the DLC3.


b.

Turn the ignition switch to ON and Techstream on.

NOTICE:

Do not start the engine.



c.

Techstream:

Enter the following menus: Powertrain / Engine and ECT / Active Test / Control the Fuel Pump / Speed.


d.

Check that there are no fuel leaks after doing maintenance anywhere on the fuel system.