Home › Engine / Hybrid System › 3UR-FE FUEL › FUEL TANK
RM27L0U _51 Engine / Hybrid System _049298 3UR-FE FUEL _0235583 FUEL TANK A

3UR-FE FUEL  FUEL TANK  INSTALLATION  


PROCEDURE

Hide 77020A 1.INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY

Hide 77697 2.INSTALL NO. 1 FUEL TANK HEAT INSULATOR

a.
A152250E01
3.1,0.561 3.388,0.739 0.288,0.178 10 Nut 2.92,1.458 3.047,0.649 false 3.041,0.649 3.088,0.649 false

Install the No. 1 fuel tank heat insulator with the 4 clips and nut.

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)


Hide 77100 3.INSTALL FUEL TANK ASSEMBLY

a.

Set the fuel tank on a transmission jack and raise the fuel tank assembly.


b.
A185651

Connect the wire harness clamp and fuel pump connector to the fuel tank assembly.

NOTICE:

Be careful not to cut the wirings.



c.

Raise the transmission jack.


d.
A152248

Install the 2 fuel tank bands with the 2 pins and 2 clips.


e.

Connect the 2 fuel tank bands with the 2 bolts.

Torque:
40 N*m (408 kgf*cm, 30 ft.*lbf)


f.
A185652E03
0.604,4.146 0.604,4.24 false 1.125,3.917 1.427,4.208 1.427,4.208 1.333,3.917 false 2.385,3.979 2.385,4.083 false 0.25,3.573 0.292,2.958 false 0.708,3.427 1.042,3.146 false 1.573,0.354 1.917,0.5 0.344,0.146 10 false Push 0.198,4.25 0.875,4.406 0.677,0.156 10 false Connector 1.948,4.104 2.688,4.281 0.74,0.177 10 false Nylon Tube 1.229,4.24 1.698,4.406 0.469,0.167 10 false O-Ring 0.333,2.844 0.635,3.021 0.302,0.177 10 true Pipe 1.073,3.052 1.625,3.208 0.552,0.156 10 false Retainer

Connect the fuel tank breather tube to the fuel tank inlet pipe sub-assembly.

HINT:

Push the parts together firmly until a "click" sound is heard.


NOTICE:
·

Before installing the tube connectors to the pipes, check if there is any damage or foreign matter in the connectors.

·

After the connection, check if the connectors and pipes are securely connected by trying to pull them apart.




g.
A185653

Connect the vent line hose and install the retainer.

NOTICE:
·

Before installing the hose, make sure that it is not damaged. Make sure that there is no foreign matter present on the connecting surfaces.

·

After connecting, check if the hose and the connector are securely connected by pulling on them.




h.
A185648

Connect the fuel tank to filler pipe hose to the fuel tank assembly.


Hide 77204A 4.CONNECT FUEL TANK RETURN TUBE

A185655

a.

Connect the fuel tank return tube.

HINT:

Push the parts together firmly until a "click" sound is heard.


NOTICE:
·

Before installing the tube connectors to the pipes, check if there is any damage or foreign matter in the connectors.


·

After the connection, check if the connectors and pipes are securely connected by trying to pull them apart.




b.

Attach the lock claws to the connector by pushing down on the cover, as shown in the illustration.


Hide 77209D 5.CONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY

a.
A185654E01
1.362,2.313 1.725,2.466 0.363,0.152 10 Push 0.197,4.311 0.874,4.464 0.678,0.153 10 Connector 1.95,4.165 2.687,4.342 0.737,0.177 10 Nylon Tube 1.225,4.3 1.689,4.470 0.464,0.170 10 O-Ring 0.606,4.205 0.606,4.306 false 1.124,3.975 1.43,4.269 1.43,4.269 1.335,3.982 false 0.331,2.902 0.630,3.083 0.298,0.181 10 Pipe 2.39,4.041 2.39,4.142 false 0.246,3.632 0.288,3.023 false 1.073,3.112 1.630,3.265 0.556,0.153 10 Retainer 0.706,3.484 1.046,3.212 false

Connect the fuel tank main tube.

HINT:

Push the parts together firmly until a "click" sound is heard.


NOTICE:
·

Before installing the tube connectors to the pipes, check if there is any damage or foreign matter in the connectors.


·

After the connection, check if the connectors and pipes are securely connected by trying to pull them apart.




b.

Attach the lock claws to the connector by pushing down on the cover, as shown in the illustration.


Hide 77310A 6.INSTALL FUEL TANK CAP