Home › Engine / Hybrid System › 3UR-FE LUBRICATION › OIL PRESSURE SWITCH
RM27L0U _51 Engine / Hybrid System _049306 3UR-FE LUBRICATION _0235628 OIL PRESSURE SWITCH A

3UR-FE LUBRICATION  OIL PRESSURE SWITCH  INSTALLATION  


PROCEDURE

Hide 83520 1.INSTALL OIL PRESSURE SENDER GAUGE ASSEMBLY

a.
A118764E02
1.797,1.519 2.393,1.677 0.596,0.158 10 Adhesive 1.863,1.227 2.156,1.52 false

Apply adhesive to 2 or 3 threads of the oil pressure sender gauge.

Adhesive:

Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent



b.
A162467

Install the oil pressure sender gauge.

Torque:
15 N*m (153 kgf*cm, 11 ft.*lbf)

NOTICE:

Do not start the engine within 1 hour after installation.



c.
A163657

Connect the sender gauge connector.