Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL SYSTEM
RM27L0U _51 Engine / Hybrid System _049309 CRUISE CONTROL _0235639 CRUISE CONTROL SYSTEM U

CRUISE CONTROL  CRUISE CONTROL SYSTEM  TERMINALS OF ECU  


CHECK ECM


U153064E04
5.542,0.281 5.802,0.458 0.26,0.177 10 false A27 2.292,0.281 2.563,0.458 0.271,0.177 10 false D56

a.

Measure the voltage and resistance according to the value(s) in the table below.

HINT:

The standard normal voltage between each pair of ECM terminals is shown in the table below. The appropriate conditions for checking each pair of terminals are also indicated. The result of checks should be compared with the standard normal voltage for that pair of terminals, displayed in the Specified Condition column. The illustration above can be used as a reference to identify the ECM terminal locations.


Terminal No. (Symbols) Wiring Color Terminal Description Condition Specified Condition
A27-16 (TC) - D56-81 (E1) R - BR Ground Ignition switch to ON 11 to 14 V
A27-16 (TC) - D56-81 (E1) R - BR Ground Connect terminals TC and CG of DLC3 Below 1 V
A27-26 (STP) - D56-81 (E1) LG - BR Stop light signal Ignition switch to ON, Brake pedal depressed 11 to 14 V
A27-26 (STP) - D56-81 (E1) LG - BR Stop light signal Ignition switch to ON, Brake pedal released Below 1 V
A27-45 (CCS) - D56-81 (E1) BR - BR Cruise control main switch circuit Ignition switch to ON 11 to 14 V
A27-45 (CCS) - D56-81 (E1) BR - BR Cruise control main switch circuit CANCEL switch ON 6.6 to 10.1 V
A27-45 (CCS) - D56-81 (E1) BR - BR Cruise control main switch circuit SET/COAST switch ON 4.5 to 7.1 V
A27-45 (CCS) - D56-81 (E1) BR - BR Cruise control main switch circuit RES/ACC switch ON 2.3 to 4.0 V
A27-45 (CCS) - D56-81 (E1) BR - BR Cruise control main switch circuit MAIN switch ON Below 1 V
A27-35 (ST1-) - D56-81 (E1) R - BR Stop light signal Ignition switch to ON, Brake pedal depressed Below 1 V
A27-35 (ST1-) - D56-81 (E1) R - BR Stop light signal Brake pedal released 11 to 14 V
D56-27 (D) - D56-81 (E1) G - BR D shift position signal Ignition switch to ON, shift lever not in D Below 1 V
D56-27 (D) - D56-81 (E1) G - BR D shift position signal Ignition switch to ON, shift lever in D 11 to 14 V