CRUISE CONTROL
CRUISE CONTROL SYSTEM
DYNAMIC LASER CRUISE CONTROL SYSTEM
- PRECAUTION
- PARTS LOCATION
- SYSTEM DIAGRAM
- SYSTEM DESCRIPTION
- HOW TO PROCEED WITH TROUBLESHOOTING
- ROAD TEST
- OPERATION CHECK
- INITIALIZATION
- PROBLEM SYMPTOMS TABLE
- TERMINALS OF ECU
- DIAGNOSIS SYSTEM
- DTC CHECK / CLEAR
- FAIL-SAFE CHART
- DATA LIST / ACTIVE TEST
- DIAGNOSTIC TROUBLE CODE CHART
- P1631 While the dynamic laser cruise control is either preparing for operation or operating, if the ECM...
- P1630 While the dynamic laser cruise control is either preparing for operation or operating, if communication data...
- U0100, U0122, U0126, U1101
- U0123 While the dynamic laser cruise control is either preparing for operation or operating, the ECM continuously...
- U0235, U1102
- C1267 During cruise control operation a micro switch error is stored under the following conditions: A micro switch...
- P0500, P0503
- P0571 Voltage of STP terminal and that of ST1- terminal of ECM are less than 1 V for 0.5 seconds. or more.
- P0575 When STV signal is input and cruise control continues for 0.4 seconds. When malfunction STV signal is...
- P1570, P1572
- P1575 The ECM receives a buzzer abnormal signal for 0.2 seconds or more while the dynamic laser cruise control is...
- P1617 While the dynamic laser cruise control is either preparing for operation or operating, if a designation...
- P1616 While the dynamic laser cruise control is either preparing for operation or operating, if the ECM...
- P1615 While the dynamic laser cruise control is either preparing for operation or operating, if communication data...
- P1578 The ECM receives a brake system error signal for 0.2 seconds or more while the dynamic laser cruise control...
- Cruise Control Switch Circuit
- Distance Control ECU Power Source Circuit
- Distance Control Switch Circuit
- Laser Sensor Power Source Circuit
- Wiper Signal Circuit
- Washer Signal Circuit
- Cruise Main Indicator Light Circuit
CRUISE CONTROL MAIN SWITCH
DISTANCE CONTROL ECU
LASER SENSOR