CHECK DISTANCE CONTROL ECU
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| A43-1 (B) - A43-12 (GND) | BE - BR | Battery | Ignition switch ON | 11 to 14 V |
| A43-8 (CANH) - A43-12 (GND) | BE - BR | CAN communication signal | CAN communication circuit | Pulse generation |
| A43-9 (CANL) - A43-12 (GND) | W - BR | CAN communication signal | CAN communication circuit | Pulse generation |
| A43-10 (SGND) - Body ground | BR - Body ground | Ground | Always | Below 1 Ω |
| A43-12 (GND) - Body ground | BR - Body ground | Ground | Always | Below 1 Ω |
| A43-13 (IGB) - A43-12 (GND) | L - BR | Ignition switch ON signal | Ignition switch off | Below 1 V |
| A43-13 (IGB) - A43-12 (GND) | L - BR | Ignition switch ON signal | Ignition switch ON | 11 to 14 V |
| A43-22 (LRDD) - A43-10 (SGND) | V - BR | Laser radar sensor input signal | Ignition switch ON | Pulse generation
(see waveform 1) |
| A43-23 (LRRD) - A43-10 (SGND) | P - BR | Laser radar sensor output signal | Ignition switch ON | Pulse generation
(see waveform 2) |
| A43-16 (MODE) - A43-12 (GND) | P - BR | Steering pad switch signal (Distance control switch signal) | Ignition switch ON, Steering pad switch signal ON | Below 2 V |
| A43-16 (MODE) - A43-12 (GND) | P - BR | Steering pad switch signal (Distance control switch signal) | Ignition switch ON, Steering pad switch signal OFF | 11 to 14 V |
Using an oscilloscope, check waveform 1.
| Item | Content |
|---|---|
| Terminal No. (Symbol) | A43-22 (LRDD) - A43-10 (SGND) |
| Tool Setting | 2 V/DIV., 10 msec./DIV. |
| Condition | Ignition switch ON |
Using an oscilloscope, check waveform 2.
| Item | Content |
|---|---|
| Terminal No. (Symbol) | A43-23 (LRRD) - A43-10 (SGND) |
| Tool Setting | 2 V/DIV., 5 msec./DIV. |
| Condition | Ignition switch ON |
CHECK ECM
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| A27-26 (STP) - D56-81 (E1) | LG - BR | Stop light signal | Brake pedal released (Stop light switch off) | Below 1 V |
| A27-26 (STP) - D56-81 (E1) | LG - BR | Stop light signal | Brake pedal depressed (Stop light switch on) | 11 to 14 V |
| A27-35 (ST1-) - D56-81 (E1) | R - BR | Stop light signal | Ignition switch ON, Brake pedal depressed (Stop light switch on) | Below 1 V |
| A27-35 (ST1-) - D56-81 (E1) | R - BR | Stop light signal | Ignition switch ON, Brake pedal released (Stop light switch off) | 11 to 14 V |
| A27-16 (TC) - D56-81 (E1) | R - BR | Terminal TC of DLC3 | Ignition switch ON | 11 to 14 V |
| A27-16 (TC) - D56-81 (E1) | R - BR | Terminal TC of DLC3 | Connect terminals TC and CG of DLC3 | Below 1 V |
| A27-44 (LGND) - Body ground | GR - Body ground | Ground | Always | Below 1 Ω |
| A27-45 (CCS) - D56-81 (E1) | BR - BR | Cruise control main switch signal | Ignition switch ON | 11 to 14 V |
| A27-45 (CCS) - D56-81 (E1) | BR - BR | Cruise control main switch signal | CANCEL switch on | 6.6 to 10.1 V |
| A27-45 (CCS) - D56-81 (E1) | BR - BR | Cruise control main switch signal | - (COAST)/SET switch on | 4.5 to 7.1 V |
| A27-45 (CCS) - D56-81 (E1) | BR - BR | Cruise control main switch signal | + (ACCEL)/RES (RESUME) switch on | 2.3 to 4.0 V |
| A27-45 (CCS) - D56-81 (E1) | BR - BR | Cruise control main switch signal | Main switch on | Below 1 V |
| A27-37 (CCHG) - D56-81 (E1) | L - BR | Distance control switch signal | Ignition switch ON, Cruise control main switch on, MODE switch on | Below 1 V |
| A27-37 (CCHG) - D56-81 (E1) | L - BR | Distance control switch signal | Ignition switch ON, Cruise control main switch on, MODE switch off | 11 to 14 V |
| D56-81 (E1) - Body ground | BR - Body ground | Ground | Always | Below 1 Ω |
CHECK LASER RADAR SENSOR
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| A26-1 (LGND) - Body ground | GR - Body ground | Ground (Distance signal) | Always | Below 1 Ω |
| A26-2 (SGND) - Body ground | BR - Body ground | Ground | Always | Below 1 Ω |
| A26-3 (LRDD) - A26-2 (SGND) | V - BR | Laser radar sensor output signal | Ignition switch ON | Pulse generation
(see waveform 1) |
| A26-4 (LRRD) - A26-2 (SGND) | P - BR | Laser radar sensor input signal | Ignition switch ON | Pulse generation
(see waveform 2) |
| A26-5 (IGB) - A26-2 (SGND) | L - BR | Power source | Ignition switch ON | 11 to 14 V |
Using an oscilloscope, check waveform 1.
| Item | Content |
|---|---|
| Terminal No. (Symbol) | A26-3 (LRDD) - A26-2 (SGND) |
| Tool Setting | 2 V/DIV., 10 msec./DIV. |
| Condition | Ignition switch ON |
Using an oscilloscope, check waveform 2.
| Item | Content |
|---|---|
| Terminal No. (Symbol) | A26-4 (LRRD) - A26-2 (SGND) |
| Tool Setting | 2 V/DIV., 5 msec./DIV. |
| Condition | Ignition switch ON |
BRAKE ACTUATOR ASSEMBLY (SKID CONTROL ECU)
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| A19-9 (BZ) - Body ground | Y - Body ground | Skid control buzzer circuit | Ignition switch ON
Skid control buzzer is sounded |
Below 1 V ←→ 11 to 14 V |
| Ignition switch ON
Skid control buzzer is not sounded |
11 to 14 V | |||
| A19-15 (STPO) - Body ground | BR - Body ground | Stop light control relay output signal | Ignition switch ON | 11 to 14 V |
| A19-6 (STP2) - Body ground | GR - Body ground | Stop light control relay input signal | Brake pedal released
(Stop light switch OFF) |
Below 1.0 V |
| Brake pedal depressed
(Stop light switch ON) |
11 to 14 V | |||
| A19-38 (STP) - Body ground | Y - Body ground | Stop light switch input signal | Brake pedal released
(Stop light switch OFF) |
Below 1.0 V |
| Brake pedal depressed
(Stop light switch ON) |
11 to 14 V |