Home › Drivetrain › AB60F AUTOMATIC TRANSMISSION / TRANSAXLE › AUTOMATIC TRANSMISSION SYSTEM
RM27L0U _52 Drivetrain _049310 AB60F AUTOMATIC TRANSMISSION / TRANSAXLE _0235644 AUTOMATIC TRANSMISSION SYSTEM U

AB60F AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSMISSION SYSTEM  TERMINALS OF ECM  


CHECK ECM


U153029E03
2.802,0.344 3.094,0.521 0.292,0.177 10 false D56 5.458,0.344 5.719,0.521 0.26,0.177 10 false A27

HINT:

Each ECM terminal's standard voltage is shown in the table below.

In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specified Condition".

Use the illustration above as a reference for the ECM terminals.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
A27-21 (L4) - D56-81 (E1) Y - BR 4L position signal
·

Ignition switch ON

·

Transfer position switch on 4L


Below 1.5 V
·

Ignition switch ON

·

Transfer position switch not on 4L


11 to 14 V
D56-120 (NSW) - D56-81 (E1) L - BR PNP switch signal
·

Ignition switch ON

·

Shift lever in P or N


Below 1 V
·

Ignition switch ON

·

Shift lever not in P or N


11 to 14 V
D56-2 (P) - D56-81 (E1) G-B - BR P shift position switch signal
·

Ignition switch ON

·

Shift lever in P


11 to 14 V
·

Ignition switch ON

·

Shift lever not in P


Below 1 V
D56-26 (R) - D56-81 (E1) L-R - BR R shift position switch signal
·

Ignition switch ON

·

Shift lever in R


11 to 14 V
·

Ignition switch ON

·

Shift lever not in R


Below 1 V
D56-25 (N) - D56-81 (E1) G-W - BR N shift position switch signal
·

Ignition switch ON

·

Shift lever in N


11 to 14 V
·

Ignition switch ON

·

Shift lever not in N


Below 1 V
D56-27 (D) - D56-81 (E1) G - BR D shift position switch signal
·

Ignition switch ON

·

Shift lever in D


11 to 14 V
·

Ignition switch ON

·

Shift lever not in D


Below 1 V
A27-25 (S) - D56-81 (E1) Y - BR S shift position switch signal
·

Ignition switch ON

·

Shift lever in S


11 to 14 V
·

Ignition switch ON

·

Shift lever not in S


Below 1 V
A27-38 (SFTU) - D56-81 (E1) G - BR Up-shift shift position switch signal
·

Ignition switch ON

·

Shift lever in S


11 to 14 V
·

Ignition switch ON

·

Shift lever "+" position (up-shift)


Below 1 V
A27-27 (SFTD) - D56-81 (E1) BE - BR Down-shift position switch signal
·

Ignition switch ON

·

Shift lever in S


11 to 14 V
·

Ignition switch ON

·

Shift lever "-" position (down-shift)


Below 1 V
D56-7 (S1) - D56-81 (E1) R - BR S1 solenoid signal 1st gear Below 1 V
Not on 1st gear 11 to 14 V
D56-6 (S2) - D56-81 (E1) W - BR S2 solenoid signal 1st, 2nd or 6th gear 11 to 14 V
3rd, 4th or 5th gear Below 1 V
D56-3 (S3) - D56-81 (E1) G-W - BR S3 solenoid signal 1st, 2nd or 3rd gear 11 to 14 V
4th, 5th or 6th gear Below 1 V
D56-5 (S4) - D56-81 (E1) G-R - BR S4 solenoid signal 5th or 6th gear 11 to 14 V
1st, 2nd, 3rd or 4th gear Below 1 V
D56-4 (SR) - D56-81 (E1) G - BR SR solenoid signal 1st, 2nd, 3rd or 4th gear 11 to 14 V
5th or 6th gear Below 1 V
D56-14 (SL1+) - D56-15 (SL1-) Y - L SL1 solenoid signal 5th or 6th gear Pulse generation
D56-12 (SL2+) - D56-13 (SL2-) G-R - L-W SL2 solenoid signal Engine is idling Pulse generation
D56-9 (SLT+) - D56-8 (SLT-) B - G-B SLT solenoid signal Engine is idling Pulse generation
D56-10 (SLU+) - D56-11 (SLU-) L-Y - L-R SLU solenoid signal 5th (lock-up) gear or 6th (lock-up) gear Pulse generation
D56-122 (THO1) - D56-98 (ETHA) G-Y - BR No. 1 ATF temperature sensor signal No. 1 ATF temperature: 115°C (239°F) or higher Below 1.5 V
D56-99 (THO2) - D56-98 (ETHA) L - BR No. 2 ATF temperature sensor signal No. 2 ATF temperature: 115°C (239°F) or higher Below 1.5 V
D56-101 (SP2+) - D56-100 (SP2-) Y - B Speed sensor SP2 signal Vehicle speed 20 km/h (12 mph) Pulse generation
(see waveform 1)
D56-124 (NT+) - D56-123 (NT-) Y - B Speed sensor NT signal Engine is idling
(shift lever in P or N)
Pulse generation
(see waveform 2)
A27-10 (CANH) - D56-81 (E1) GR - BR CAN communication line Ignition switch ON Pulse generation
(see waveform 3)
A27-11 (CANL) - D56-81 (E1) W - BR CAN communication line Ignition switch ON Pulse generation
(see waveform 4)
A27-51 (PWR) - D56-81 (E1) L - BR Tow/haul pattern select switch signal
·

Ignition switch ON

·

Tow/haul pattern select switch ON


0 to 1.5 V
·

Ignition switch ON

·

Tow/haul pattern select switch OFF


Pulse generation*

HINT:

*: Voltage is input intermittently as this is an intermittent circuit. (Voltage varies between a peak of 7.5 to 14 V and a low of 0 to 1.5 V.)


a.
C161208E04
2.708,0.097 3.293,0.298 0.585,0.201 10 2 V/DIV. 2.996,0.904 3.348,1.106 0.352,0.202 10 GND 1.541,1.688 2.440,1.883 0.900,0.195 10 20 msec./DIV.

Using an oscilloscope, check waveform 1.

Reference
Item Content
Terminal No. (Symbol) D56-101 (SP2+) - D56-100 (SP2-)
Tool setting 2 V/DIV., 20 msec./DIV.
Condition Vehicle speed 20 km/h (12 mph)


b.
C162170E03
2.707,0.097 3.292,0.298 0.585,0.201 10 1 V/DIV. 2.995,0.904 3.347,1.106 0.352,0.202 10 GND 1.637,1.688 2.453,1.883 0.816,0.195 10 2 msec./DIV.

Using an oscilloscope, check waveform 2.

Reference
Item Content
Terminal No. (Symbol) D56-124 (NT+) - D56-123 (NT-)
Tool setting 1 V/DIV., 2 msec./DIV.
Condition Engine is idling (Shift lever in P or N)


c.
C161206E03
2.707,0.095 3.293,0.296 0.585,0.201 10 1 V/DIV. 1.591,1.687 2.449,1.882 0.858,0.195 10 10 μsec./DIV. 2.993,1.361 3.345,1.563 0.352,0.202 10 GND

Using an oscilloscope, check waveform 3.

Reference
Item Content
Terminal No. (Symbol) A27-10 (CANH) - D56-81 (E1)
Tool setting 1 V/DIV., 10 μsec./DIV.
Condition Ignition switch ON


d.
C161207E03
2.705,0.093 3.290,0.294 0.585,0.201 10 1 V/DIV. 1.589,1.685 2.447,1.880 0.858,0.195 10 10 μsec./DIV. 2.991,1.359 3.343,1.561 0.352,0.202 10 GND

Using an oscilloscope, check waveform 4.

Reference
Item Content
Terminal No. (Symbol) A27-11 (CANL) - D56-81 (E1)
Tool setting 1 V/DIV., 10 μsec./DIV.
Condition Ignition switch ON