1.INSTALL TRANSMISSION FLOOR SHIFT ASSEMBLY
Install the transmission floor shift with the 4 bolts. Tighten the bolts in the order shown in the illustration.
Connect the clamp and 2 connectors.
33820B
2.CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY
Install the cable outer of the transmission control cable to the shift lever retainer, and install a new clip.
Connect the transmission control cable end to the shift lever.
Make sure to install the cable end so that the inner cable is not twisted. Confirm that the cable end's ridged side is facing upward.
3.INSTALL FRONT CONSOLE BOX ASSEMBLY
Install the front console box assembly (See page Vehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX>INSTALLATION).
4.INSPECT SHIFT LEVER POSITION
5.ADJUST SHIFT LEVER POSITION