Home › Drivetrain › AB60F AUTOMATIC TRANSMISSION / TRANSAXLE › SHIFT LEVER
RM27L0U _52 Drivetrain _049310 AB60F AUTOMATIC TRANSMISSION / TRANSAXLE _0235656 SHIFT LEVER A

AB60F AUTOMATIC TRANSMISSION / TRANSAXLE  SHIFT LEVER  REASSEMBLY  


PROCEDURE

Hide 85903 1.INSTALL SHIFT LOCK CONTROL ECU

a.
C179217

Engage the 3 claws, and install the shift lock control ECU.


b.

Connect the shift lock solenoid connector.


Hide 35974 2.INSTALL LOWER POSITION INDICATOR HOUSING

a.
C179216

Engage the 6 claws, and install the lower position indicator housing.


Hide 33563 3.INSTALL SHIFT LOCK RELEASE BUTTON

a.
C179214

Engage the 2 claws, and install the shift lock release spring and shift lock release button.


Hide 35976 4.INSTALL NO. 2 POSITION INDICATOR SLIDE COVER

a.
C179213

Install the No. 2 position indicator slide cover to the position indicator slide cover.


Hide 35975 5.INSTALL POSITION INDICATOR SLIDE COVER

a.
C179212

Install the position indicator slide cover with the No. 2 position indicator slide cover.

HINT:

Install the position indicator slide cover so that its mark faces the vehicle front.



Hide 35970F 6.INSTALL POSITION INDICATOR HOUSING ASSEMBLY

a.
C179211

Engage the 4 claws, and install the position indicator housing.


Hide 35906 7.INSTALL INDICATOR LIGHT WIRE SUB-ASSEMBLY

a.
C179210

Align the wire with the key part of the position indicator housing lower, and install the wire. Then rotate the wire clockwise until it locks.


b.
U153572E02
1.521,1.281 1.156,1 true 1.521,1.573 1.156,1.854 true 2.625,3.167 2.948,2.594 2.948,2.594 2.813,2.594 false 0.24,0.073 2.719,0.458 2.479,0.385 10 false Component without harness connected: (Transmission Control Switch) 0.854,0.865 1.188,1.052 0.333,0.188 10 false ILL+ 0.896,1.813 1.208,2 0.313,0.188 10 false ILL- 1.083,2.49 2.938,2.677 1.854,0.188 10 false Connector Housing Retainer

Securely connect the 2 wire terminals to terminal 4 (ILL+) and 8 (ILL-) of the transmission control switch connector. Then push the connector housing retainer to lock it.


c.
C179245

Check the indicator light wire harness as shown in the illustration.