1.DRAIN ENGINE COOLANT
17410
2.REMOVE FRONT EXHAUST PIPE ASSEMBLY
3.DISCONNECT WATER BY-PASS PIPE ASSEMBLY
Remove the bolt and disconnect the 2 water by-pass hoses from the transmission oil cooler. Then separate the by-pass pipe from the automatic transmission.
Use a container to catch any coolant which flows out of the water by-pass hoses.
33490F
4.REMOVE TRANSMISSION OIL COOLER ASSEMBLY
Remove the 3 bolts and transmission oil cooler with transmission oil cooler spacer.
Separate the transmission oil cooler from the transmission oil cooler spacer.
Remove the 4 O-rings.