Home › Drivetrain › DRIVE SHAFT / PROPELLER SHAFT › PROPELLER SHAFT ASSEMBLY(for 4WD)
RM27L0U _52 Drivetrain _049313 DRIVE SHAFT / PROPELLER SHAFT _0235686 PROPELLER SHAFT ASSEMBLY(for 4WD) A

DRIVE SHAFT / PROPELLER SHAFT  PROPELLER SHAFT ASSEMBLY(for 4WD)  DISASSEMBLY  


PROCEDURE

Hide 04371H 3.REMOVE REAR PROPELLER SHAFT UNIVERSAL JOINT SPIDER

HINT:

Use the same removal procedure for both the front and rear propeller shaft universal joint spiders.


a.
C179260E03
1.25,0.969 1.042,0.156 1.042,0.156 1.76,0.969 false 0.208,0.073 1,0.375 0.792,0.302 10 true Matchmarks

Place matchmarks on the universal joint sleeve yoke and propeller shaft's universal joint yoke.


b.
C179262

Remove the grease fitting from the spider bearing.


c.
U152374

Using needle-nose pliers, remove the 4 hole snap rings.


d.

Fix the propeller shaft assembly in a vise between aluminum plates.


e.
C184732

Using a screwdriver, remove the 4 slingers of the spider bearing.


f.
C184643E02
2.844,0.802 2.563,1.052 false 0.781,2.573 1.417,2.563 1.417,2.563 0.99,2.302 false 1.479,2.906 0.792,2.906 false 2.885,0.698 3.219,1.01 0.333,0.313 10 false SST 1.531,2.813 2.49,3.125 0.958,0.313 10 false Spider Bearing 1.479,2.479 1.813,2.792 0.333,0.313 10 false SST

Using SST, pull the universal joint spider bearing from the propeller shaft's universal joint yoke.

SST
09950-40011  (09951-04010, 09952-04010, 09953-04020, 09954-04010, 09957-04010, 09958-04011)
09955-04100  
09331-60010  

NOTICE:

Pull out the spider bearing until the SST claws contact the propeller shaft's universal joint yoke.



g.
C179267E03
2.031,2.677 1.833,2.531 false 2.052,2.615 3.167,2.948 1.115,0.333 10 true Hammering Point

Clamp the removed universal joint spider bearing in a vise.


h.

Using a brass bar and hammer, tap the propeller shaft's universal joint yoke to remove the universal joint spider bearing.

NOTICE:

Do not tap the propeller shaft tube.


HINT:

Use the same removal procedure for the universal joint spider bearing on the opposite side.



i.

Remove the universal joint sleeve yoke and universal joint spider from the propeller shaft.


j.
C184645E02
1.177,2.292 1.854,2.615 1.854,2.615 0.958,2.635 false 0.927,2.885 1.823,2.885 false 2.917,0.76 2.74,1.156 false 2.948,0.656 3.25,0.969 0.302,0.313 10 false SST 1.865,2.802 2.813,3.115 0.948,0.313 10 false Spider Bearing 1.896,2.531 2.198,2.76 0.302,0.229 10 true SST

Using SST, pull out the universal joint spider bearing from the universal joint sleeve yoke.

SST
09950-40011  (09951-04010, 09952-04010, 09953-04020, 09954-04010, 09957-04010, 09958-04011)
09955-04100  
09331-60010  

NOTICE:

Pull out the spider bearing until the SST claws contact the universal joint sleeve yoke.



k.
C179271E04
2,2.219 1.802,2.313 false 2.021,2.125 3.125,2.396 1.104,0.271 10 true Hammering Point

Clamp the removed universal joint spider bearing in a vise.


l.

Using a brass bar and hammer, tap the universal joint sleeve yoke to remove the universal joint spider bearing.

HINT:

Use the same removal procedure for the universal joint spider bearing on the opposite side.



m.

Remove the universal joint spider from the universal joint sleeve yoke.