Home › Drivetrain › AXLE AND DIFFERENTIAL › FRONT DIFFERENTIAL CARRIER ASSEMBLY(for 4WD)
RM27L0U _52 Drivetrain _049314 AXLE AND DIFFERENTIAL _0235691 FRONT DIFFERENTIAL CARRIER ASSEMBLY(for 4WD) A

AXLE AND DIFFERENTIAL  FRONT DIFFERENTIAL CARRIER ASSEMBLY(for 4WD)  REMOVAL  


PROCEDURE

Hide 1.REMOVE FRONT WHEELS

Hide 37140 4.REMOVE FRONT PROPELLER SHAFT ASSEMBLY

Hide 43420 5.REMOVE FRONT DRIVE SHAFT ASSEMBLY LH

Hide 43410 6.REMOVE FRONT DRIVE SHAFT ASSEMBLY RH

HINT:

Use the same procedure as the LH side.


Hide 41110F 7.REMOVE FRONT DIFFERENTIAL CARRIER ASSEMBLY

a.
U152227E03
0.99,0.24 1.198,0.406 0.208,0.167 10 true D 2.49,0.302 2.698,0.469 0.208,0.167 10 false E 2.135,1.844 2.302,2.042 0.167,0.198 10 true C 2.948,1.542 3.156,1.708 0.208,0.167 10 false B 0.802,0.927 0.948,1.094 0.146,0.167 10 true F 0.875,1.25 1.052,1.417 0.177,0.167 10 true G 2.604,1.656 2.813,1.823 0.208,0.167 10 true A

Remove the bolt and disconnect the front differential breather tube bracket.


b.

Disconnect the automatic disconnecting differential actuator hose.


c.

Disconnect the automatic disconnecting differential actuator connector.


d.

Support the front differential with a jack.


e.

Remove the A, B, C, D and E bolts.


f.

Slowly lower the jack, and remove the front differential carrier.


g.

Remove the F and G bolts, and differential support.