Home › Drivetrain › AXLE AND DIFFERENTIAL › FRONT AXLE HUB
RM27L0U _52 Drivetrain _049314 AXLE AND DIFFERENTIAL _0235694 FRONT AXLE HUB A

AXLE AND DIFFERENTIAL  FRONT AXLE HUB  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the LH side and RH side.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.REMOVE FRONT WHEEL

Hide 2.DISCONNECT FRONT DISC BRAKE CALIPER ASSEMBLY LH

a.
C159312

Remove the bolt and disconnect the brake tube bracket from the steering knuckle.


b.
C159313

Remove the 2 bolts and disconnect the disc brake caliper from the steering knuckle.

NOTICE:
·

Do not disconnect the flexible hose from the disc brake caliper.

·

Do not twist or bend the flexible hose.




Hide 43512 3.REMOVE FRONT DISC LH

Hide 43514C 4.REMOVE FRONT AXLE HUB GREASE CAP LH (for 4WD)

a.
C159317

Using a screwdriver and hammer, remove the axle hub grease cap.

NOTICE:

Do not damage the axle hub.



Hide 43502H 5.REMOVE FRONT AXLE HUB NUT LH (for 4WD)

a.
C159318

Remove the cotter pin and adjusting lock cap.


b.

Using a 39 mm socket wrench, remove the axle hub nut.


Hide 43502C 6.REMOVE FRONT AXLE HUB SUB-ASSEMBLY LH (for 2WD)

a.
C159319

Remove the 4 bolts.


b.

Remove the axle hub and dust cover from the steering knuckle.


c.

Remove the O-ring from the axle hub.


Hide 43502C 7.REMOVE FRONT AXLE HUB SUB-ASSEMBLY LH (for 4WD)

a.
U152343

Remove the 4 bolts.


b.

Using a plastic-faced hammer, tap out the front drive shaft from the front axle hub.

NOTICE:

Be careful not to damage the drive shaft boot.



c.

Remove the axle hub and dust cover from the steering knuckle.


d.

Remove the O-ring from the axle hub.