Home › Drivetrain › AXLE AND DIFFERENTIAL › REAR AXLE HUB BOLT
RM27L0U _52 Drivetrain _049314 AXLE AND DIFFERENTIAL _0235697 REAR AXLE HUB BOLT A

AXLE AND DIFFERENTIAL  REAR AXLE HUB BOLT  REPLACEMENT  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the LH side and RH side.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.REMOVE PARKING BRAKE ASSEMBLY

Hide 42611E 2.REMOVE REAR AXLE HUB BOLT LH

a.
C180964E03
1.552,1.927 1.333,1.927 false 2.833,0.604 2.51,0.854 false 1.031,1.844 1.354,2.021 0.323,0.177 10 true Hold 2.646,1.698 2.969,1.854 0.323,0.156 10 false Turn 2.875,0.49 3.177,0.656 0.302,0.167 10 false SST

Using SST and a screwdriver or equivalent to hold the axle hub, remove the hub bolt.

SST
09650-17011  


Hide 42611E 3.INSTALL REAR AXLE HUB BOLT LH

a.
C180965E02
2.146,0.292 2.688,0.677 false 3.031,1.281 3.135,1.417 false 1.615,0.167 2.125,0.323 0.51,0.156 10 false Washer 3.052,1.417 3.302,1.563 0.25,0.146 10 false Nut 1.688,1.75 2.021,1.927 0.333,0.177 10 false Turn 0.917,1.771 1.24,1.927 0.323,0.156 10 false Hold

Temporarily install a washer and hub nut to a new hub bolt as shown in the illustration.

NOTICE:

Install hub nuts to prevent damage to the hub bolts.



b.

Using a screwdriver or equivalent to hold the hub, turn the hub nut until the bottom surface of the hub bolt head touches the axle hub.


c.

Remove the washer and hub nut.

NOTICE:

Do not damage the threads of the hub bolts.



Hide 4.INSTALL PARKING BRAKE ASSEMBLY