Home › Suspension › REAR SUSPENSION › REAR STABILIZER BAR
RM27L0U _53 Suspension _049318 REAR SUSPENSION _0235726 REAR STABILIZER BAR A

REAR SUSPENSION  REAR STABILIZER BAR  REMOVAL  


PROCEDURE

Hide 17430 1.REMOVE EXHAUST PIPE ASSEMBLY TAIL (for 3UR-FE)

Hide 17430 2.REMOVE EXHAUST PIPE ASSEMBLY TAIL (for 3UR-FBE)

Hide 37110 3.REMOVE PROPELLER SHAFT ASSEMBLY (for 2WD)

Hide 37117 4.REMOVE PROPELLER SHAFT HEAT INSULATOR (for 4WD)

Hide 48840A 7.REMOVE REAR STABILIZER LINK ASSEMBLY LH

C180603

a.

Remove the 2 nuts and the rear stabilizer link.

HINT:

If the ball joint turns together with the nut, use a hexagon wrench to hold the stud.



Hide 48830D 8.REMOVE REAR STABILIZER LINK ASSEMBLY RH

HINT:

Perform the same procedure as for the LH side.


Hide 48824R 9.REMOVE REAR STABILIZER BRACKET

a.
C180768E02
0.094,0.094 0.698,0.385 0.604,0.292 10 true LH Side: 0.104,2.406 0.708,2.698 0.604,0.292 10 true RH Side:

Remove the 4 bolts and 2 brackets.


Hide 48812 10.REMOVE REAR STABILIZER BAR

a.

Remove the rear stabilizer bar from the vehicle.


Hide 48815R 11.REMOVE REAR STABILIZER BUSH

a.

Remove the 2 bushes from the rear stabilizer bar.