Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › YAW RATE AND DECELERATION SENSOR
RM27L0U _54 Brake _049321 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0235739 YAW RATE AND DECELERATION SENSOR G

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  YAW RATE AND DECELERATION SENSOR  INSPECTION  


PROCEDURE

Hide 89183A 1.CHECK YAW RATE SENSOR

a.

Check the yaw rate sensor.

Under any of the following conditions, replace the sensor with a new one:

·

The surface of the sensor is cracked, dented, or chipped.

·

The connector is scratched, cracked, or damaged.

·

The sensor has been dropped.