Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › STEERING ANGLE SENSOR
RM27L0U _54 Brake _049321 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0235740 STEERING ANGLE SENSOR G

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  STEERING ANGLE SENSOR  INSPECTION  


PROCEDURE

Hide 89245B 1.CHECK STEERING ANGLE SENSOR

a.

Check the steering angle sensor.

Under any of the following conditions, replace the sensor with a new one:

·

The surface of the sensor is cracked, dented, or chipped.

·

The connector is scratched, cracked, or damaged.

·

The sensor has been dropped.