Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › SKID CONTROL BUZZER
RM27L0U _54 Brake _049321 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0235741 SKID CONTROL BUZZER G

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  SKID CONTROL BUZZER  INSPECTION  


PROCEDURE

Hide 86652A 1.INSPECT SKID CONTROL BUZZER ASSEMBLY

a.
C155485

Apply battery's positive (+) lead to terminal 1 of the skid control buzzer, and negative (-) lead to terminal 2. Then check that the buzzer sounds.

OK:

Skid control buzzer sounds.


If the result is not as specified, replace the skid control buzzer assembly.