CHECK POWER STEERING ECU ASSEMBLY
| *a | Component without harness connected
(Power Steering ECU Assembly) |
- | - |
Measure the voltage and resistance according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| H117-1 (CANH) - H117-2 (CANL) | GR - W | CAN communication | Ignition switch off | 54 to 69 Ω |
| H117-3 (GND) - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |
| H117-5 (IG) - H117-3 (GND) | GR - W-B | IG power supply | Ignition switch ON | 11 to 14 V |
| H117-7 (SOF+) - H117-8 (SOF-) | LG - BE | Power steering solenoid valve signal | ·
Engine idling ·
Steering wheel turned to right or left |
Pulse generation |
If the result is not as specified, the ECU may have a malfunction.