Home › Steering › POWER ASSIST SYSTEMS › VANE PUMP(for 3UR-FE, 3UR-FBE)
RM27L0U _55 Steering _049326 POWER ASSIST SYSTEMS _0235761 VANE PUMP(for 3UR-FE, 3UR-FBE) A

POWER ASSIST SYSTEMS  VANE PUMP(for 3UR-FE, 3UR-FBE)  DISASSEMBLY  


PROCEDURE

Hide 44320 1.FIX VANE PUMP ASSEMBLY

a.
C181329E01
1.44,1.538 0.907,1.541 false 0.542,1.459 0.965,1.643 0.422,0.184 10 SST

Using SST, hold the vane pump in a vise.

SST
09630-00014  (09631-00132)


Hide 44337 2.REMOVE POWER STEERING SUCTION PORT UNION

a.
C181330

Remove the bolt and suction port union from the vane pump.


b.

Using a screwdriver, remove the O-ring from the suction port union.


Hide 3.REMOVE VANE PUMP REAR HOUSING

a.
C131230

Remove the 4 bolts and rear housing from the front housing.


b.
C107025E02
2.008,0.196 3.001,0.383 0.993,0.187 10 Protective Tape 1.974,0.282 1.69,0.282 1.69,0.282 1.276,1.15 false

Using a screwdriver, remove the O-ring from the rear housing.

HINT:

Tape the screwdriver tip before use.



Hide 44303A 4.REMOVE SHAFT WITH PULLEY SUB-ASSEMBLY

a.
C131231

Using 2 screwdrivers, remove the snap ring from the shaft.


b.

Remove the shaft with pulley.

NOTICE:

Be careful not to drop or damage the shaft with pulley. If it is damaged, replace the vane pump assembly.



Hide 5.REMOVE VANE PUMP ROTOR

a.
C114697

Remove the 10 vane plates.

NOTICE:

Take care not to drop the vane plate.



b.

Remove the vane pump rotor.


Hide 6.REMOVE VANE PUMP CAM RING

a.
C114698

Remove the cam ring from the front housing.


Hide 44341 7.REMOVE VANE PUMP FRONT SIDE PLATE

a.
C114699

Remove the front side plate from the front housing.


b.
C107029E02
2.159,0.08 3.176,0.254 1.017,0.174 10 Protective Tape 2.096,0.16 1.724,0.16 1.724,0.16 1.26,0.83 false

Using a screwdriver, remove the O-ring from the front side plate.

HINT:

Tape the screwdriver tip before use.



c.
C114700

Remove the O-ring from the front housing.


Hide 8.REMOVE VANE PUMP HOUSING OIL SEAL

a.
C114701E02
2.616,0.127 2.989,0.288 0.373,0.161 10 Cloth 2.564,0.219 2.157,0.219 2.157,0.219 1.855,0.523 false

Using a screwdriver and piece of cloth, pry out the oil seal.

NOTICE:

Be careful not to damage the front housing.