Home › Steering › STEERING COLUMN › STEERING COLUMN ASSEMBLY(for Manual Tilt and Manual Telescopic Steering Column)
RM27L0U _55 Steering _049327 STEERING COLUMN _0235763 STEERING COLUMN ASSEMBLY(for Manual Tilt and Manual Telescopic Steering Column) G

STEERING COLUMN  STEERING COLUMN ASSEMBLY(for Manual Tilt and Manual Telescopic Steering Column)  INSPECTION  


PROCEDURE

Hide 45250 1.INSPECT STEERING COLUMN ASSEMBLY

a.
C159758E02
1.62,0.395 2.165,0.551 0.545,0.156 10 A

Measure the length of the steering main shaft.

Standard length (A):

529.5 mm (1.74 ft.)



b.

Inspect the bushings.

i.
U153875E02
1.063,0.49 1.5,0.49 1.5,0.49 1.875,1.083 true 1.198,0.5 1.427,0.875 true 0.865,0.385 1.302,0.698 0.438,0.313 10 false *a

Check that the 2 bushings are securely installed to the steering column assembly.

Text in Illustration
*a bushing

If the bushings are missing or damaged, replace the steering column assembly with a new one.


ii.

Check the 2 bushings for deformation and damage.

If the bushings are deformed or damaged, replace the steering column assembly with a new one.



c.

Inspect the capsules.

i.
C243653E03
0.87,0.316 0.792,1.071 false 0.571,0.315 1.49,0.315 1.49,0.315 2.014,1.053 false 0.376,0.21 0.603,0.420 0.228,0.209 10 *a 2.346,0.397 2.507,0.627 0.161,0.230 10 A 2.608,0.45 2.802,0.637 0.194,0.187 10 B

Check that the 2 capsules are securely installed to the steering column assembly as shown in the illustration.

Text in Illustration
*a Matchmark

Standard Dimension:
A B
3 mm (0.118 in.) 10 mm (0.394 in.)


If the capsules are not positioned as specified, replace the steering column assembly with a new one.


ii.

Check the 2 capsules for deformation and damage.

If either of the capsules is deformed, loose, missing or damaged, replace the steering column assembly with a new one.