Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM
RM27L0U _56 Audio / Visual / Telematics _049330 NAVIGATION / MULTI INFO DISPLAY _0235785 NAVIGATION SYSTEM J

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM  Voice is not Recognized  


PROCEDURE

1.CHECK CONDITION
a.

Check if the system voice recognition success rate is low when recognizing a particular voice.

Result
Result Proceed to
System voice recognition success rate is low with any voice A
System voice recognition success rate is low only for a particular voice B

NOTICE:
·

System voice recognition success rate varies depending on voice and pronunciation. This is not a malfunction.

·

When the voice recognition training function is enabled via the vehicle settings, it becomes easier to recognize the particular voice of a user.





A

2.CHECK MICROPHONE AND VOICE RECOGNITION (OPERATION CHECK)

B

CONFIRM VEHICLE SETTINGS (TRAIN VOICE RECOGNITION)

2.CHECK MICROPHONE AND VOICE RECOGNITION (OPERATION CHECK)
a.
E268457

Enter the "Microphone Check" screen. [Refer to Check Mic&Voice Recognition in Operation Check (See page Audio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>OPERATION CHECK)]


b.

When voice is input into the microphone, check that the microphone input level meter changes according to the input voice.


c.

Push the recording switch and perform voice recording.

·

Select the recording switch with the blower motor of the air conditioning system stopped. If an outlet of the air conditioning system is facing the microphone, noise may be recorded.

·

Voice can be recorded for up to 5 seconds.



d.

Check that the recording indicator remains on while recording and that the recorded voice is played normally without noise or distortion.

OK:

All check results are normal.




OK

NG

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE