Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › REAR VIEW MONITOR SYSTEM(for Navigation Receiver Type)
RM27L0U _56 Audio / Visual / Telematics _049331 PARK ASSIST / MONITORING _0235796 REAR VIEW MONITOR SYSTEM(for Navigation Receiver Type) U

PARK ASSIST / MONITORING  REAR VIEW MONITOR SYSTEM(for Navigation Receiver Type)  TERMINALS OF ECU  


CHECK NAVIGATION RECEIVER ASSEMBLY


U153911E02
4.167,0.698 4.417,0.896 0.25,0.198 10 false I53 1.115,1.688 1.469,1.885 0.354,0.198 10 false I26 2.01,0.708 2.354,0.906 0.344,0.198 10 false I54

a.

Disconnect the I26 and I53 navigation receiver assembly connectors.


b.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specification
I26-3 (ACC1) - I26-7 (GND1) GR - W-B Power source (ACC) Ignition switch off Below 1 V
Ignition switch ACC 11 to 14 V
I26-4 (+B1) - I26-7 (GND1) L - W-B Power source (+B) Always 11 to 14 V
I26-7 (GND1) - Body ground W-B - Body ground Ground Always Below 1 Ω
I53-1 (IG) - I26-7 (GND1) W - W-B Power source (IG) Ignition switch off Below 1 V
Ignition switch ON 11 to 14 V


c.

Reconnect the I26 and I53 navigation receiver assembly connectors.


d.

Measure the voltage and waveform according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specification
I53-2 (REV) - I26-7 (GND1) G - W-B Reverse signal Ignition switch ON, shift lever in R 7.5 to 14 V
Ignition switch ON, shift lever not in R Below 1 V
I54-11 (CA+) - I54-23 (CGND) B - W Power source Ignition switch ACC 5.5 to 7.05 V
I54-12 (V+) - I54-24 (V-) R - Shielded Display signal Ignition switch ON, shift lever in R Pulse generation (See waveform 1)
Ignition switch ON, shift lever in R, screen blacked out by covering camera lens Pulse generation (See waveform 2)
I54-23 (CGND) - Body ground W - Body ground Shielded ground Always Below 1 V


e.

Using an oscilloscope, check the waveform.

E333898E02
1.469,1.698 1.615,2.281 1.615,2.281 1.75,2.281 false 1.365,1.813 1.208,2.292 1.208,2.292 1.094,2.292 false 4.667,1.656 4.51,2.302 4.51,2.302 4.406,2.302 false 4.781,1.594 4.927,2.292 4.927,2.292 5.063,2.292 false 0.365,0.26 0.677,0.458 0.313,0.198 10 false *a 3.677,0.292 3.99,0.49 0.313,0.198 10 false *b 0.896,2.198 1.208,2.396 0.313,0.198 10 false *c 4.198,2.219 4.51,2.417 0.313,0.198 10 false *c 1.833,2.208 2.146,2.406 0.313,0.198 10 false *d 5.135,2.219 5.448,2.417 0.313,0.198 10 false *d 0.573,1.26 1.031,1.458 0.458,0.198 10 false GND 3.854,1.26 4.313,1.458 0.458,0.198 10 false GND

i.

Waveform 1

Measurement Condition
Item Content
Terminal No. (Symbol) I54-12 (V+) - I54-24 (V-)
Tool Setting 0.2 V/DIV., 50 μs/DIV.
Condition Ignition switch ON, shift lever in R

HINT:

The video waveform changes according to the image sent by the rear television camera assembly.



ii.

Waveform 2

Measurement Condition
Item Content
Terminal No. (Symbol) I54-12 (V+) - I54-24 (V-)
Tool Setting 0.2 V/DIV., 50 μs/DIV.
Condition Ignition switch ON, shift lever in R, screen blacked out by covering camera lens

HINT:

The video waveform changes according to the image sent by the rear television camera assembly.


Text in Illustration
*a Waveform 1
*b Waveform 2
*c Synchronized Signal
*d Video Waveform