Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENGINE HOOD COURTESY SWITCH
RM27L0U _58 Vehicle Interior _049337 THEFT DETERRENT / KEYLESS ENTRY _0235821 ENGINE HOOD COURTESY SWITCH G

THEFT DETERRENT / KEYLESS ENTRY  ENGINE HOOD COURTESY SWITCH  INSPECTION  


PROCEDURE

Hide 53510 1.INSPECT HOOD LOCK ASSEMBLY

B192531E01
0.134,2.02 2.634,2.196 2.500,0.176 10 Component without harness connected: 0.133,2.243 2.114,2.435 1.981,0.192 10 (Engine Hood Courtesy Switch)

a.

Check the resistance of the engine hood courtesy switch.

i.

Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Lock 10 kΩ or higher
1 - 2 Unlock Below 1 Ω


If the results is not as specified, replace the hood lock.