Use the same procedure for the RH side and LH side.
The procedure listed below are for the RH side.
1.INSTALL REAR NO. 1 SEAT ASSEMBLY RH
Place the rear No. 1 seat assembly in the cabin.
Be careful not to damage the vehicle body.
Insert the 2 locating pins through the 2 body holes, move the rear No. 1 seat to its rearmost position, and make sure that the inner and outer seat tracks are locked securely.
Install the 2 bolts.
Operate the seat track adjusting handle to move the seat to the foremost position and make sure that the inner and outer seat tracks are locked securely.
Install the 2 bolts.
2.INSTALL REAR NO. 1 SEAT ASSEMBLY RH (w/ Seat Heater System)
Place the rear No. 1 seat assembly in the cabin.
Be careful not to damage the vehicle body.
Insert the 2 locating pins through the 2 body holes, move the rear No. 1 seat to its rearmost position, and make sure that the inner and outer seat tracks are locked securely.
Install the 2 bolts.
Operate the seat track adjusting handle to move the seat to the foremost position and make sure that the inner and outer seat tracks are locked securely.
Install the 2 bolts.
Attach the wire harness clamp and connect the seat heater connector.
72157
3.INSTALL SEAT TRACK BRACKET COVER INNER (w/ Center Seat)
Attach the 9 clips to install the seat track bracket cover.
72157
4.INSTALL SEAT TRACK BRACKET COVER INNER
Attach the 6 clips to install the seat track bracket cover.
Operate the seat track adjusting handle to move the seat to the rearmost position.
72159B
5.INSTALL REAR SEAT TRACK BRACKET COVER INNER
Attach the 2 claws to install the rear seat track bracket cover.
72159D
6.INSTALL REAR SEAT TRACK BRACKET COVER OUTER
Attach the 2 claws to install the rear seat track bracket cover.
67917A
7.INSTALL REAR DOOR SCUFF PLATE RH
58371F
8.INSTALL REAR FLOOR STEP NO. 1 COVER
58372E
9.INSTALL REAR FLOOR STEP NO. 2 COVER
71693
10.INSTALL REAR SEAT CUSHION HINGE COVER LOWER RH