Home › Vehicle Interior › SEAT › REAR NO. 2 SEAT ASSEMBLY(for Power Seat Type LH Side)
RM27L0U _58 Vehicle Interior _049342 SEAT _0235864 REAR NO. 2 SEAT ASSEMBLY(for Power Seat Type LH Side) A

SEAT  REAR NO. 2 SEAT ASSEMBLY(for Power Seat Type LH Side)  INSTALLATION  


PROCEDURE

Hide 1.INSTALL REAR NO. 2 SEAT ASSEMBLY LH

a.

Place the rear No. 2 seat assembly LH in the cabin.

NOTICE:

Be careful not to damage the vehicle body.



b.
B193993

Insert the 2 locating pins through the 2 body holes and make sure that the inner and outer seat tracks are locked securely.


c.

Install the 2 bolts.

Torque:
37 N*m (374 kgf*cm, 27 ft.*lbf)


d.

Connect the seat wire connector.


e.
B193989

Install the 2 bolts.

Torque:
37 N*m (374 kgf*cm, 27 ft.*lbf)


f.
B222250

Pass the center belts through the hole of the seat cushion.


Hide 72124 2.INSTALL SEAT TRACK BRACKET FRONT COVER OUTER

a.
B232093E01
0.996,2.019 1.195,2.175 0.200,0.156 10 (1) 1.597,1.813 1.797,1.969 0.200,0.156 10 (2)

Attach the 2 guides and claw and clip in the order shown in the illustration, and then install the seat track bracket front cover outer.


Hide 72127E 3.INSTALL SEAT TRACK BRACKET FRONT COVER INNER

a.
B193988E02
0.905,1.218 1.091,1.382 0.187,0.164 10 (1) 0.494,1.761 0.690,1.925 0.196,0.164 10 (2)

Attach the 2 guides and 2 claws in the order shown in the illustration, and then install the seat track bracket front cover inner.


Hide 58403K 5.INSTALL DECK BOARD REINFORCEMENT SUB-ASSEMBLY

Hide 58401A 6.INSTALL NO. 1 DECK BOARD SUB-ASSEMBLY

Hide 64429G 8.INSTALL LUGGAGE COMPARTMENT TRIM BOX

Hide 58408D 9.INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY