Home › Vehicle Interior › SEAT › REAR NO. 2 SEAT ASSEMBLY(for Power Seat Type RH Side)
RM27L0U _58 Vehicle Interior _049342 SEAT _0235884 REAR NO. 2 SEAT ASSEMBLY(for Power Seat Type RH Side) A

SEAT  REAR NO. 2 SEAT ASSEMBLY(for Power Seat Type RH Side)  INSTALLATION  


PROCEDURE

Hide 1.INSTALL REAR NO. 2 SEAT ASSEMBLY RH

a.

Install the rear No. 2 seat assembly RH.

NOTICE:

Be careful not to damage the vehicle body.



b.
B191204

Insert the 2 locating pins through the 2 body holes and make sure that the inner and outer seat tracks are locked securely.


c.

Install the 2 bolts.

Torque:
37 N*m (374 kgf*cm, 27 ft.*lbf)


d.

Connect the seat wire connector.


e.
B191200

Install the 2 bolts.

Torque:
37 N*m (374 kgf*cm, 27 ft.*lbf)


Hide 72123A 2.INSTALL SEAT TRACK BRACKET FRONT COVER OUTER

a.
B232093E01
0.996,2.019 1.195,2.175 0.200,0.156 10 (1) 1.597,1.813 1.797,1.969 0.200,0.156 10 (2)

Attach the 2 guides and claw and clip in the order shown in the illustration, and then install the seat track bracket front cover inner.


b.
B191197E02
0.502,1.605 0.694,1.786 0.192,0.181 10 (1) 0.107,1.986 0.296,2.164 0.189,0.178 10 (2)

Attach the 2 guides and 2 claws in the order shown in the illustration, and then install the seat track bracket front cover outer.


Hide 72127E 3.INSTALL SEAT TRACK BRACKET FRONT COVER INNER

Hide 58403K 5.INSTALL DECK BOARD REINFORCEMENT SUB-ASSEMBLY

Hide 58401A 6.INSTALL NO. 1 DECK BOARD SUB-ASSEMBLY

Hide 64429G 8.INSTALL LUGGAGE COMPARTMENT TRIM BOX

Hide 58408D 9.INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY