Home › Vehicle Exterior › WINDOW / GLASS › QUARTER WINDOW GLASS
RM27L0U _59 Vehicle Exterior _049347 WINDOW / GLASS _0235950 QUARTER WINDOW GLASS A

WINDOW / GLASS  QUARTER WINDOW GLASS  INSTALLATION  


PROCEDURE

Hide 62740B 1.CLEAN QUARTER WINDOW GLASS

BO04421

a.

Clean the outer circumference of the glass with a non-residue solvent.

NOTICE:

Do not touch the glass surface after cleaning it.



Hide 2.CLEAN VEHICLE BODY

a.
B073084E27
1.198,1.667 1.542,1.802 1.542,1.802 2.01,1.719 false 2.198,1.458 2.198,0.125 2.198,0.125 2.313,0.125 false 0.417,1.573 0.417,0.115 0.417,0.115 0.594,0.115 false 1.052,1.813 1.906,1.99 0.854,0.177 10 false Vehicle Body 0.646,0.031 1.25,0.188 0.604,0.156 10 false Adhesive 2.365,0.042 2.969,0.198 0.604,0.156 10 false Adhesive

Clean and shape the contact surface of the vehicle body.

i.

Using a knife, cut away any rough adhesive on the contact surface of the vehicle body to ensure the appropriate surface shape.

NOTICE:

Do not damage the vehicle body.


HINT:

Leave as much adhesive on the vehicle body as possible.



ii.

Clean the contact surface of the vehicle body with a shop rag or piece of cloth saturated with cleaner.

HINT:

Clean the vehicle body even if all the adhesive has been removed.




Hide 62740B 3.INSTALL QUARTER WINDOW GLASS

H002865E01
1.676,0.034 2.517,0.235 0.841,0.201 10 CORRECT 2.623,0.857 3.298,1.058 0.674,0.201 10 WRONG 1.302,0.434 1.903,0.635 0.601,0.201 10 Primer M 1.126,1.766 1.750,1.967 0.625,0.201 10 Adhesive 1.255,1.47 1.853,1.671 0.599,0.201 10 Primer M 2.423,0.885 2.028,0.571 false 2.475,1.856 2.015,1.594 false 2.35,2.002 1.891,1.895 false

a.

Using a brush, apply Primer M to the exposed part of the vehicle body.

NOTICE:
·

Allow the primer to dry for 3 minutes or more.

·

Do not apply Primer M to the adhesive.

·

Throw away any leftover Primer M.

·

Do not apply too much Primer M.




b.
B194341E03
0.208,1.292 0.333,1.438 0.125,0.146 10 false D 0.406,1.417 0.563,1.563 0.156,0.146 10 true D 0.823,1.365 0.948,1.51 0.125,0.146 10 false C 0.813,1.677 0.938,1.823 0.125,0.146 10 false C 2.531,1.229 2.656,1.375 0.125,0.146 10 false B 2.823,1.333 2.948,1.479 0.125,0.146 10 false B 2.948,0.292 3.073,0.438 0.125,0.146 10 false A 2.958,0.604 3.083,0.781 0.125,0.177 10 true A 0.094,2.063 0.354,2.208 0.26,0.146 10 false A-A 1.552,2.063 1.813,2.208 0.26,0.146 10 false B-B 0.094,3.323 0.375,3.469 0.281,0.146 10 false D-D 1.552,3.323 1.844,3.469 0.292,0.146 10 false C-C 0.625,2.26 0.719,2.417 0.094,0.156 10 false a 0.75,2.5 0.844,2.656 0.094,0.156 10 false b 2.031,2.26 2.125,2.417 0.094,0.156 10 false a 2.167,2.5 2.26,2.656 0.094,0.156 10 false b 2.031,3.51 2.125,3.667 0.094,0.156 10 false a 2.167,3.76 2.26,3.917 0.094,0.156 10 false b 0.615,3.51 0.708,3.667 0.094,0.156 10 false a 0.823,3.76 0.917,3.917 0.094,0.156 10 false c 0.021,0 0.844,0.188 0.823,0.188 10 false Back Side:

Using a brush or sponge, apply Primer G to the edge of the quarter window and contact surface.

Specification:
Area Measurement
a 5 mm (0.197 in.)
b 20 mm (0.787 in.)
c 26 mm (1.024 in.)


NOTICE:
·

Allow the primer to dry for 3 minutes or more.

·

Throw away any leftover Primer G.

·

Do not apply too much Primer G.



HINT:

If Primer G is applied to any areas other than those specified, wipe off the primer with a clean shop rag or piece of cloth before it dries.



c.

Apply adhesive.

B443169E01
0.281,0.26 0.979,0.448 0.698,0.188 10 false Back Side: 2.781,1.281 2.938,1.458 0.156,0.177 10 false A 2.771,1.51 2.938,1.688 0.167,0.177 10 true A 2.427,2.063 2.583,2.24 0.156,0.177 10 false B 2.635,2.125 2.792,2.302 0.156,0.177 10 false B 1.052,2.156 1.208,2.333 0.156,0.177 10 true C 1.052,2.448 1.208,2.625 0.156,0.177 10 false C 0.708,2.167 0.823,2.344 0.115,0.177 10 true D 0.49,2.063 0.604,2.24 0.115,0.177 10 true D 2.365,0.854 2.531,1.031 0.167,0.177 10 true a 1.917,0.719 2.083,0.896 0.167,0.177 10 false b 4.01,0.813 4.271,0.99 0.26,0.177 10 false A-A 4.417,0.729 4.542,0.885 0.125,0.156 10 false a 4.74,0.375 4.865,0.531 0.125,0.156 10 false b 4.76,0.875 4.885,1.031 0.125,0.156 10 false c 5.927,0.875 6.052,1.031 0.125,0.156 10 false c 4.76,1.76 4.885,1.917 0.125,0.156 10 false c 5.01,1.927 5.135,2.083 0.125,0.156 10 false a 6,1.927 6.125,2.083 0.125,0.156 10 false c 5.406,0.781 5.667,0.958 0.26,0.177 10 false B-B 4.073,1.656 4.333,1.833 0.26,0.177 10 false D-D 5.448,1.708 5.708,1.885 0.26,0.177 10 false C-C

Adhesive:

Toyota Genuine Windshield Glass Adhesive or the equivalent


i.

Cut the tip off the cartridge nozzle, as shown in the illustration.

HINT:

After cutting off the tip, use all adhesive within the time indicated in the table below.


Usage Time Frame:
Temperature Usage Time Frame
35°C (95°F) 15 minutes
20°C (68°F) 1 hour 40 minutes
5°C (41°F) 8 hours



ii.

Load the sealer gun with the cartridge.


iii.

Apply adhesive to the quarter window as shown in the illustration.

Specification:
Area Measurement
a 8 mm (0.315 in.)
b 12 mm (0.472 in.)
c 13 mm (0.512 in.)




d.

Install the quarter window glass onto the body.

i.

Hold the quarter window glass in place securely with protective tape or the equivalent until the adhesive hardens.

NOTICE:
·

Allow the primer coating to dry for 3 minutes or more.

·

Check that the pins are attached to the body correctly.

·

Check the clearance between the body and glass.




ii.

Lightly press the front surface of the glass to ensure a close fit.


iii.
B073131

Using a scraper, remove any excessive or protruding adhesive.

HINT:

Apply adhesive to the quarter window glass rim.


NOTICE:

Do not drive the vehicle within the time indicated in the table below.


Minimum Time:
Temperature Minimum Time Prior to Driving Vehicle
35°C (95°F) 1 hour 30 minutes
20°C (68°F) 5 hours
5°C (41°F) 24 hours




Hide 4. CHECK FOR LEAKAGE AND REPAIR

a.

After the adhesive has hardened, apply water from the outside of the vehicle. Check that no water leaks into the cabin.


b.

If water leaks into the cabin, allow the water to dry and add adhesive.


c.

Remove the protective tape.


Hide 62440 5.INSTALL ROOF SIDE RAIL GARNISH ASSEMBLY

a.
B194339

Engage the 4 clips and install the roof side rail garnish.


Hide 6.INSTALL ROOF HEADLINING ASSEMBLY (w/ Rear Seat Entertainment System)

a.

Install the roof headlining assembly (See page Vehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION).


Hide 7.INSTALL ROOF HEADLINING ASSEMBLY (w/o Rear Seat Entertainment System)

a.

Install the roof headlining assembly (See page Vehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION).


Hide 8.INSTALL ROOF HEADLINING ASSEMBLY (w/ Sliding Roof)

a.

Install the roof headlining assembly (See page Vehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION).


Hide 9.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).


Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)

Hide 10.CHECK SRS WARNING LIGHT