85475
1.REMOVE POWER BACK DOOR ROD
67939B
2.REMOVE BACK DOOR CENTER GARNISH
67937B
3.REMOVE BACK DOOR SIDE GARNISH RH
67938A
4.REMOVE BACK DOOR SIDE GARNISH LH
67963A
5.REMOVE BACK DOOR STRAP COVER
67961
6.REMOVE BACK DOOR PULL STRAP
67750
7.REMOVE BACK DOOR TRIM BOARD ASSEMBLY
67847A
8.REMOVE BACK DOOR SERVICE HOLE COVER
84260G
9.REMOVE POWER BACK DOOR SENSOR LH
Disconnect the connector.
Remove the 6 screws.
Disengage the 2 clips and remove the power back door sensor assembly.