84260F
1.INSTALL POWER BACK DOOR SENSOR RH
Install the power back door sensor with 2 clips.
Install the 6 screws.
Connect the connector.
67848C
2.INSTALL BACK DOOR NO. 2 SERVICE HOLE COVER
67750
3.INSTALL BACK DOOR TRIM BOARD ASSEMBLY
67961
4.INSTALL BACK DOOR PULL STRAP
67963A
5.INSTALL BACK DOOR STRAP COVER
67938A
6.INSTALL BACK DOOR SIDE GARNISH LH
67937B
7.INSTALL BACK DOOR SIDE GARNISH RH
67939B
8.INSTALL BACK DOOR CENTER GARNISH
85475
9.INSTALL POWER BACK DOOR ROD