Home › Vehicle Exterior › WIPER / WASHER › REAR WIPER MOTOR
RM27L0U _59 Vehicle Exterior _049351 WIPER / WASHER _0235979 REAR WIPER MOTOR A

WIPER / WASHER  REAR WIPER MOTOR  REMOVAL  


PROCEDURE

Hide 85475 1.REMOVE POWER BACK DOOR ROD (w/ Power Back Door)

Hide 67939B 2.REMOVE BACK DOOR CENTER GARNISH

Hide 67937B 3.REMOVE BACK DOOR SIDE GARNISH RH

Hide 67938A 4.REMOVE BACK DOOR SIDE GARNISH LH

Hide 67963A 5.REMOVE BACK DOOR STRAP COVER

Hide 67961 6.REMOVE BACK DOOR PULL STRAP

Hide 67750 7.REMOVE BACK DOOR TRIM BOARD ASSEMBLY

Hide 67847A 8.REMOVE BACK DOOR SERVICE HOLE COVER

Hide 85292A 9.REMOVE REAR WIPER ARM HEAD CAP

a.
E161700

Disengage the claw and remove the rear wiper arm head cap.


Hide 10.REMOVE REAR WIPER BLADE ASSEMBLY

a.
E161701

Remove the nut and remove the rear wiper blade assembly.


Hide 85110R 11.REMOVE REAR WIPER MOTOR ASSEMBLY

a.
E161698

Disengage the clamp and disconnect the connector.


b.

Loosen the 3 bolts and remove the rear wiper motor.

NOTICE:

Do not try to remove the bolts since they are integrated with the motor.



Hide 85143R 12.REMOVE REAR WIPER MOTOR GROMMET

a.
E161696

Remove the rear wiper motor grommet.