Use the same procedure for both the RH and LH sides.
The procedure described below is for the LH side.
67939B
1.REMOVE BACK DOOR CENTER GARNISH
67937B
2.REMOVE BACK DOOR SIDE GARNISH RH
67938A
3.REMOVE BACK DOOR SIDE GARNISH LH
67963A
4.REMOVE BACK DOOR STRAP COVER
67961
5.REMOVE BACK DOOR PULL STRAP
67750
6.REMOVE BACK DOOR TRIM BOARD ASSEMBLY
67847A
7.REMOVE BACK DOOR SERVICE HOLE COVER
81590A
8.REMOVE REAR LIGHT ASSEMBLY
Disconnect the connector.
Remove the 2 nuts.
Disengage the clip and remove the rear light.