Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › FRONT DOOR BELT MOULDING
RM27L0U _59 Vehicle Exterior _049355 EXTERIOR PANELS / TRIM _0236015 FRONT DOOR BELT MOULDING A

EXTERIOR PANELS / TRIM  FRONT DOOR BELT MOULDING  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The procedure described below is for the LH side.



PROCEDURE

Hide 67492A 1.REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH

HINT:

Use the same procedure as for the RH side (See page Vehicle Exterior>DOOR / HATCH>FRONT DOOR>DISASSEMBLY).


Hide 69284C 2.REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG

HINT:

Use the same procedure as for the RH side (See page Vehicle Exterior>DOOR / HATCH>FRONT DOOR>DISASSEMBLY).


Hide 74232 3.REMOVE FRONT ARMREST BASE UPPER PANEL

HINT:

Use the same procedure as for the RH side (See page Vehicle Exterior>DOOR / HATCH>FRONT DOOR>DISASSEMBLY).


Hide 67602 4.REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY

HINT:

Use the same procedure as for the RH side (See page Vehicle Exterior>DOOR / HATCH>FRONT DOOR>DISASSEMBLY).


Hide 87906B 5.REMOVE OUTER REAR VIEW MIRROR ASSEMBLY

Hide 68210C 6.REMOVE FRONT DOOR GLASS OUTER WEATHERSTRIP ASSEMBLY

B191700E02
1.604,1.375 1.979,1.875 false 2.031,1.854 3.052,2.042 1.021,0.188 10 true Protective Tape

a.

Apply protective tape to the door panel in the area around the front door glass outer weatherstrip.


b.
B191701E02
1.917,1.729 1.49,1.75 false 1.948,1.625 3.167,1.813 1.219,0.188 10 true Moulding Remover

Using a moulding remover, disengage the 5 claws and the clip and remove the front door glass outer weatherstrip.