Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR DOOR BELT MOULDING
RM27L0U _59 Vehicle Exterior _049355 EXTERIOR PANELS / TRIM _0236016 REAR DOOR BELT MOULDING A

EXTERIOR PANELS / TRIM  REAR DOOR BELT MOULDING  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The procedure described below is for the LH side.



PROCEDURE

Hide 75766A 1.REMOVE REAR DOOR WINDOW FRAME REAR MOULDING

Hide 68164A 2.REMOVE REAR DOOR GLASS OUTER WEATHERSTRIP

B191703E02
1.729,1.365 2.094,1.781 false 2.125,1.719 3.135,1.906 1.01,0.188 10 true Protective Tape

a.

Apply protective tape to the door panel in the area around the rear door glass outer weatherstrip.


b.
B191704E02
2.167,1.604 2.542,1.396 false 2.563,1.302 3.26,1.688 0.698,0.385 10 true Moulding Remover

Using a moulding remover, disengage the 5 claws and the clip and remove the rear door glass outer weatherstrip.