Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › BACK DOOR BELT MOULDING
RM27L0U _59 Vehicle Exterior _049355 EXTERIOR PANELS / TRIM _0236024 BACK DOOR BELT MOULDING A

EXTERIOR PANELS / TRIM  BACK DOOR BELT MOULDING  REMOVAL  


PROCEDURE

Hide 75816 1.REMOVE BACK DOOR OUTSIDE MOULDING LH

Hide 75815 2.REMOVE BACK DOOR OUTSIDE MOULDING RH

Hide 85293A 3.REMOVE REAR WIPER STOPPER

Hide 68290A 4.REMOVE BACK DOOR GLASS OUTER WEATHERSTRIP ASSEMBLY

a.
B195691E02
2.427,1.052 2.698,1.625 false 2.281,1.646 3.333,1.927 1.052,0.281 10 true Protective Tape

Apply protective tape to the door panel in the area around the back door glass outer weatherstrip.


b.
B195692E02
1.76,1.771 2.292,1.156 false 1.146,1.781 2.354,2.146 1.208,0.365 10 true Moulding Remover

Using a moulding remover, disengage the 9 claws and remove the back door glass outer weatherstrip.