Home › RESTRAINTS › SUPPLEMENTAL RESTRAINT SYSTEM › OCCUPANT CLASSIFICATION ECU

OCCUPANT CLASSIFICATION ECU > REMOVAL

for Preparation Click here



1. PRECAUTION

CAUTION:
Be sure to read "PRECAUTION" thoroughly before servicing (Click here).



2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent the airbag working.



3. REMOVE FRONT SEAT ASSEMBLY (for Manual Seat)

HINT:
(Click here)



4. REMOVE FRONT SEAT ASSEMBLY (for Power Seat)

HINT:
(Click here)



5. REMOVE OCCUPANT CLASSIFICATION ECU
  1. Disconnect the 2 connectors from the occupant classification ECU.



    H045345
  1. Using a screwdriver, remove the occupant classification ECU.