Home › BRAKE › BRAKE CONTROL › VEHICLE STABILITY CONTROL SYSTEM

VEHICLE STABILITY CONTROL SYSTEM > HOW TO PROCEED WITH TROUBLESHOOTING

for Preparation Click here


*: Use Techstream.


1.Vehicle Brought to Workshop





    2.Check and Clear DTCs and Freeze Frame Data*

      HINT:
      Click here and Click here.






    3.Problem Symptom Confirmation


      .
      Symptom does not occur: Go to step 5

      .
      Symptom occurs: Go to step 6

      4.Symptom Simulation





        5.DTC Check*

          HINT:
          Click here.



        .
        There is no output: Go to step 7

        .
        There is output: Go to step 8

        6.Problem Symptoms Table

          HINT:
          Click here.



        .
        Check for fluid leakage and Go to step 10

        7.DTC Chart

          HINT:
          Click here.






        8.Circuit Inspection*





          9.Identification of Problem





            10.Repair





              11.Confirmation Test*




                End