Home › BODY › ENGINE HOOD / DOOR › SLIDE DOOR CLOSER SYSTEM

SLIDE DOOR CLOSER SYSTEM > HOW TO PROCEED WITH TROUBLESHOOTING

for Preparation Click here


HINT:
Troubleshoot in accordance with the procedures on the following pages.



1.VEHICLE BROUGHT TO WORKSHOP

    NEXT


    2.CUSTOMER PROBLEM ANALYSIS CHECK AND SYMPTOM CHECK

      NEXT


      3.INSPECT COMMUNICATION FUNCTION OF LARGE-SCALE MULTIPLEX COMMUNICATION SYSTEM (BEAN)
      1. Use the Techstream to check for normal function of the multiplex communication system.

        1. (ECU unconnected, communication line malfunctioning) Without code outputs, proceed to A.

        2. (ECU unconnected, communication line malfunctioning) With code outputs, proceed to B.



      B.
      Go To MULTIPLEX COMMUNICATION SECTION
      A


      4.PROBLEM SYMPTOMS TABLE
      1. When problem is not listed on problem symptoms table, proceed to A.

      2. When problem is listed on problem symptoms table, proceed to B.



      B.
      Go to step 6
      A


      5.PERFORM TROUBLESHOOTING ACCORDING TO MALFUNCTION SYMPTOM
      1. Data List / Active Test (Click here).

      2. Terminals of ECU (Click here).


      NEXT


      6.ADJUST, REPAIR OR REPLACE AND RESET SLIDE DOOR SYSTEM

        NEXT

        END