Home › RESTRAINTS › SEAT BELT › REAR SEAT INNER BELT ASSEMBLY

REAR SEAT INNER BELT ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL REAR SEAT 3 POINT TYPE BELT ASSEMBLY (for 8-Passenger)

HINT:
Refer to the instructions for reassembly of the rear No. 1 seat assembly (for center seat) (Click here).

  1. Install the rear seat 3 point type belt assembly with the bolt.

    Torque:
    42 N*m{ 430 kgf*cm , 31 ft.*lbf }



2. INSTALL REAR SEAT 3 POINT TYPE BELT ASSEMBLY (for 7-Passenger)

HINT:
Refer to the instructions for reassembly of the rear No. 1 seat assembly (for captain seat type) (Click here).

  1. Install the rear seat 3 point type belt assembly with the bolt.

    Torque:
    42 N*m{ 430 kgf*cm , 31 ft.*lbf }



3. INSTALL REAR SEAT 3 POINT TYPE BELT ASSEMBLY

HINT:
  1. Refer to the instructions for reassembly of the rear No. 2 seat assembly (for power seat type RH side) (Click here).
  2. Refer to the instructions for reassembly of the rear No. 2 seat assembly (for manual seat type RH side) (Click here).

  1. Install the rear seat 3 point type belt assembly with the bolt.

    Torque:
    44 N*m{ 448 kgf*cm , 32 ft.*lbf }



4. INSTALL REAR SEAT INNER BELT ASSEMBLY

HINT:
  1. Refer to the instructions for reassembly of the rear No. 2 seat assembly (for power seat type LH side) (Click here).
  2. Refer to the instructions for reassembly of the rear No. 2 seat assembly (for manual seat type LH side) (Click here).

  1. Install the rear seat inner belt assembly with the bolt.

    Torque:
    44 N*m{ 448 kgf*cm , 32 ft.*lbf }