Home › RESTRAINTS › SEAT BELT › REAR CENTER SEAT INNER BELT ASSEMBLY

REAR CENTER SEAT INNER BELT ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL CENTER REAR SEAT LAP TYPE BELT ASSEMBLY (for 8-Passenger)

HINT:
Refer to the instructions for reassembly of the rear No. 1 seat assembly (for center seat) (Click here).

  1. Install the center rear seat lap type belt assembly with the bolt.

    Torque:
    42 N*m{ 430 kgf*cm , 31 ft.*lbf }



2. INSTALL CENTER REAR NO. 2 SEAT LAP BELT ASSEMBLY WITH INNER

HINT:
  1. Refer to the instructions for reassembly of the rear No. 2 seat assembly (for power seat type LH side) (Click here).
  2. Refer to the instructions for reassembly of the rear No. 2 seat assembly (for manual seat type LH side) (Click here).

  1. Install the center rear No. 2 seat lap belt assembly with inner with the bolt.

    Torque:
    44 N*m{ 448 kgf*cm , 32 ft.*lbf }



3. INSTALL REAR NO. 2 SEAT BELT ASSEMBLY INNER

HINT:
  1. Refer to the instructions for reassembly of the rear No. 2 seat assembly (for power seat type LH side) (Click here).
  2. Refer to the instructions for reassembly of the rear No. 2 seat assembly (for manual seat type LH side) (Click here).

  1. Install the rear No. 2 seat belt assembly inner with the bolt.

    Torque:
    44 N*m{ 448 kgf*cm , 32 ft.*lbf }