ENGINE REAR OIL SEAL > REMOVAL |
| 1. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY (for 2WD) |
| 2. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY (for 4WD) |
| 3. REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY |
![]() |
Using SST, hold the crankshaft.
![]() |
Remove the 8 bolts, front spacer, drive plate and rear spacer.
| 4. REMOVE ENGINE REAR OIL SEAL |
![]() |
Using a knife, cut off the oil seal lip.
Using a screwdriver, pry out the oil seal.