Home › SUSPENSION & AXLE › TIRE AND WHEEL › TIRE PRESSURE WARNING ECU

TIRE PRESSURE WARNING ECU > INSTALLATION

for Preparation Click here



1. INSTALL TIRE PRESSURE WARNING ECU


    C156707
  1. Connect the connector to the tire pressure warning ECU.



    C156706
  1. Install the tire pressure warning ECU with the screw.



2. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

HINT:
Refer to the instructions for INSTALLATION of the instrument panel safety pad (Click here).



3. CONNECT CABLE TO BATTERY NEGATIVE TERMINAL


4. REGISTER TRANSMITTER ID

HINT:
Click here.



5. INSPECT TIRE PRESSURE WARNING SYSTEM

HINT:
Click here.



6. INITIALIZE SYSTEM

NOTICE:
  1. Be sure to register the transmitter IDs of all tires in the ECU before initialization.
  2. Be sure to inflate all tires to the proper inflation pressure before initialization.

HINT:
Click here.