Home › General › MAINTENANCE › BRAKE VACUUM HOSE (for LHD)
RM3650E _V1 General _079881 MAINTENANCE _0387647 BRAKE VACUUM HOSE(for LHD) A

MAINTENANCE  BRAKE VACUUM HOSE(for LHD)  REMOVAL  


CAUTION / NOTICE / HINT

PROCEDURE

Hide 53681 1.REMOVE UPPER FRONT SUSPENSION CENTER BRACE

Hide 44763A 2.REMOVE NO. 1 HOSE TO HOSE TUBE

a.
C413621

Unscrew the T25 screws (1) and remove the sealing frame (2).


b.
C413622

Unlock the snap fastener (1) and disconnect the No. 1 hose to hose tube.


c.

Remove the No. 1 hose to hose tube (2) from the brake booster.


d.

Detach the No. 1 hose to hose tube from the holder (3).


e.

Remove the No. 1 hose to hose tube (2).


Hide 44772B 4.REMOVE CHECK VALVE TO BRAKE EBOOSTER HOSE

CAUTION:
·

Hot surfaces.

Risk of burning!

-

Perform all work only on components that have cooled down.




a.
C413624

Unlock snap fastener (1).


b.

Detach check valve to brake booster hose.


c.
C413625

Unclip the check valve to brake booster hose from the holder (1).


d.

Unlock snap fastener (2).


e.

Detach check valve to brake booster hose.


f.

Feed out the check valve to brake booster hose toward the bottom and remove.