Home › General › MAINTENANCE › BRAKE VACUUM HOSE (for LHD)
RM3650E _V1 General _079881 MAINTENANCE _0387647 BRAKE VACUUM HOSE(for LHD) A

MAINTENANCE  BRAKE VACUUM HOSE(for LHD)  INSTALLATION  


CAUTION / NOTICE / HINT

PROCEDURE

Hide 44772B 1.INSTALL CHECK VALVE TO BRAKE EBOOSTER HOSE

a.

Connect and lock the snap fastener.

NOTICE:

The snap fastener must engage correctly.



b.

Clip the check valve to brake booster hose into the holder.


c.

Connect and lock the snap fastener.

NOTICE:

The snap fastener must engage correctly.



Hide 44763A 3.INSTALL NO. 1 HOSE TO HOSE TUBE

a.
C413623

Check the grommet on the brake booster and replace, if necessary.


b.

Connect the snap fastener.

NOTICE:

The snap fastener must engage correctly.



c.

Install the No. 1 hose to hose tube in the brake booster.


d.

Install the No. 1 hose to hose tube in the holder.


e.

Position the sealing frame and tighten the T25 screws.

Torque:
2.8 N*m (29 kgf*cm, 25 in.*lbf)


Hide 53681 4.INSTALL UPPER FRONT SUSPENSION CENTER BRACE