44772B
1.INSTALL CHECK VALVE TO BRAKE EBOOSTER HOSE
Connect and lock the snap fastener.
The snap fastener must engage correctly.
Clip the check valve to brake booster hose into the holder.
Connect and lock the snap fastener.
The snap fastener must engage correctly.
2.INSTALL FRONT CENTER FLOOR COVER
44763A
3.INSTALL NO. 1 HOSE TO HOSE TUBE
Check the grommet on the brake booster and replace, if necessary.
Connect the snap fastener.
The snap fastener must engage correctly.
Attach the No. 1 hose to hose tube with the clamps.
Install the No. 1 hose to hose tube in the brake booster.
Install the No. 1 hose to hose tube in the holder.
Position the sealing frame and tighten the T25 screws.
53681
4.INSTALL UPPER FRONT SUSPENSION CENTER BRACE